LED strip PRO 3Y 24V 60 LED/m 2835 SMD Neutral White, 6W, 300 LEDs, 5 m od 742,19 Kč | css.shopping
LED Labs
LED strip PRO 3Y 24V 60 LED/m 2835 SMD Neutral White, 6W, 300 LEDs, 5 m
The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. Neutral white color Neutral white color is the closest to daylight. It is the most versatile color, which will find use in almost any room, especially in places where we stay longer. IP20 LED strip The IP20 parameter for LED tapes defines the most popular degree of waterproofing found on the market. IP20 LED strips are designed for use wherever there is no danger of excessive moisture or exposure to water. The LED strip specified with such a class of waterproofness allows exposure to dry dust and dust, thanks to the protective layer that the LEDs mounted on the strip are covered with. LED strips 24V - lower voltage drops LED strips with 24V are an increasingly popular choice among professionals designing LED lighting systems. Thanks to the use of increased voltage, LED strips allowing the use of longer lengths without the risk of voltage drops, which manifest themselves asymmetrical light intensity across the LED strip. Note that the choice of 24V LED strip is related to the selection of a suitable LED power supply. See the colors in their natural shades When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. It affects the way our eyesight perceives illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reproduces the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow natural color reproduction on the illuminated objects. Tape 300 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. The density of an LED strip determines how many LEDs are on a meter of strip. The more LEDs per meter of LED tape, the more uniform and powerful the light is. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).Zobrazit víceZobrazit méně
