LED Labs

LED strip PRO 3Y 5050 SMD CCT, 12W, 300 LEDs, 5 m

Name: LED strip PRO 3Y 5050 SMD CCT, 12W, 300 LEDs, 5 m
Brand: LED Labs

The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. CCT LED Tape Warm or cold white light? You don't have to choose! LED CCT tape gives you the ability to change the color temperature of the LED strip. Change the atmosphere of the room with one button: cozy warm light or stimulating cold shades. The CCT tape requires the installation of an LED driver. IP20 LED tape IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. See the colors in their natural shades When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. It affects the way our eyesight perceives illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reproduces the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow natural color reproduction on the illuminated objects. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes. The increased size allows for greater light emission. The density of the LED strip included in the product name is nothing more than the number of LEDs mounted on one meter of LED strip. The number of LEDs per meter of LED strip affects the uniformity of the light of the strip mounted in the LED profile. To achieve the sought-after effect of a uniform line of light, think about the densest possible LED strip, especially where the application is in a shallow LED profile, which may limit the dispersion of light emitted by the LEDs. The density of the tape also has a direct effect on the frequency of marked LED tape cutting locations. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip. With it, it is possible to change the color temperature. When choosing a driver, voltage is an important parameter (the driver is mounted between the power supply and the LED strip). Why choose a professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).