Lumines
Mi Boxer RECEIVER 15A RF 2.4G 4 ZONE RGB FUT043
The MiBOXER receiver in combination with the MiBOXER remote control are products with an interesting and remarkable mode of operation. The connection between the receiver and the remote control is made by means of radio waves with a frequency of 2.4GHz. The receiver can be installed at any stage of LED strip installation, as it is mounted between the power supply and the strip. Diagram of the connection of the LED power supply, driver and LED tape The receiver allows you to control the RGB LED strip. The receiver can be paired with a MiBOXER series remote control or, when paired with a Wi-Fi gateway, expand the receiver's capabilities to include app-based or voice control. The receiver allows control using apps and voice assistants. This requires pairing with a Wi-Fi gateway (sold separately). Use the app to adjust the lighting to the rhythm of your day. Reducing the brightness of the light at night or turning on the lights in a room in the morning - many options from a single app. With a current of 15A, a longer section of LED strip can be connected to the driver. Different models of receivers can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit the signal from the receiver to the next device, increasing the range of the. Signal transmission is possible when the distance between consecutive devices is less than 30m. Possibility of signal transmission and synchronization Pairing the remote control with the receiver is extremely easy. Perform the action of disconnecting the main power supply from the receiver (1), and then reconnect the power supply, where in the first 3 seconds briefly hold the previously selected channel on the remote control (2) respectively. The result of the correct pairing of the devices will be the blinking of the LED strip (3) three times. Diagram of pairing the receiver with the remote control Dimensions 97x37x28mm Voltage DC 12V-24V Working range ~30m Operating current 6A per channel Maximum load 15A Frequency 2.4 GHz Wi-Fi control with Wi-Fi gateway Output connection common anode Autotransmission yes Signal synchronization yesZobrazit více
Nabídka
Všechny ceny vč. DPH; doprava podle feedu obchodu. Kliknutí vede přímo na stránku produktu v obchodě.
Vývoj ceny (nejnižší cena)
2026-07-23 – 2026-07-25min 443,94 Kč · max 443,94 Kč
Detaily produktu
- Značky
- Lumines
- GTIN
- 05904405917398