STEINEL

Steinel SensIQ EVO KNX V3.1 anthracite motion sensor

Name: Steinel SensIQ EVO KNX V3.1 anthracite motion sensor
Brand: STEINEL

Steinel sensIQ KNX V3.1 motion sensorThe anthracite Steinel sensIQ KNX V3.1 is a surface-mounted motion sensor for KNX installations. Its four pyro sensors monitor a 300° area, while the detection range can be mechanically adjusted independently in three directions. This makes it possible to tailor the response to an entrance, driveway, façade or loading area without masking the entire sensing zone.Functions and specificationspassive-infrared sensor with a tangential reach of up to 20 m;300° detection angle and zone adjustment from 2 to 20 m;KNX Bus connection with configuration via ETS, bus and Smart Remote;2–1000 lx twilight threshold and 60 s–255 min time setting;IP54 protection, protection class I and a five-year manufacturer warranty.Installation and useThe 17.2 × 11.3 × 14.4 cm housing can be installed on a wall, ceiling or corner; an external corner bracket is included. STEINEL specifies a mounting height from 2 to 5 m, with 2 m as the optimum. The sensor suits building entrances, the area around a home, courtyards, underground car parks, warehouses and loading bays. Its IP54 enclosure helps protect the housing from dust and water splashes.For a KNX projectThe KNX version provides two lighting outputs, a presence output, brightness value, basic-light function, twilight switch, individual pyro evaluation and logic gates. Plan the detection zones and ETS configuration before installation so that the sensor supports the intended automation scenario.A Smart Remote is included, and the configuration can link the sensor with building-automation logic. It is a considered choice for an installer who needs broad coverage and clearly defined control parameters.Zobrazit více

od 10 701,44 Kč

1 nabídka

Zobrazit nabídky