The QSW-M2106R-2S2T is a Layer 2 Web Managed Switch with two 10GbE SFP+ fiber ports, two 10GbE RJ45 ports and six 2.5GbE RJ45 ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2106R-2S2T offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution. With a half-width design, two QSW-M2106R-2S2T can be installed in a 1U rack space for space-saving. 10GbE connectivity Includes two 10GbE SFP+ fiber ports (Backward compatible with 1G SFP) and two 10GbE RJ45 ports, compatible with NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) for high-speed networks. 2.5GbE connectivity Six 2.5GbE RJ45 ports allow you to immediately multiply your network speed by 2.5 times while using existing Cat 5e cables. User-friendly management interface The QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive. Layer 2 network Provides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security. RSTP One of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention. Online firmware update QSS can be updated with just one click, helping IT staff ensure their network security. Half-width design, two models in 1U With a half-width rackmount design, a QSW-M2106R-2S2T can be installed in a 1U rack space with another half-width rackmount switch (such as QSW-M2108R-2C) for efficient physical space utilization and tidy cabling. Flexible deployment with multiple 10G SFP+ fiber and Gigabit ports The QSW-M2106R-2S2T provides two 10GbE SFP+ ports, two 10GbE RJ45 ports and six 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW-M2106R-2S2T is 110Gbps, guaranteeing the full potential of each port. Ports & interfaces Basic switching RJ-45 Ethernet ports quantity: 2 Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000) Installed SFP modules quantity: 0 Installed SFP+ modules quantity: 2 2.5G Ethernet (copper) ports quantity: 6 Console port: RJ-45 Weight & dimensions Width: 207 mm Depth: 248.8 mm Height: 43.3 mm Weight: 1.53 kg Power Power source: AC Power supply included: Yes AC input voltage: 100 - 240 V AC input frequency: 50 - 60 Hz Power consumption (typical): 40 W Operational conditions Operating temperature (T-T): 0 - 40 °C Operating relative humidity (H-H): 5 - 95% Network Networking standards: IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Data transmission MAC address table: 16000 entries Switching capacity: 110 Gbit/s Throughput: 55 Gbit/s Packaging data Package type: Box Package width: 337 mm Package depth: 342 mm Package height: 104 mm Package weight: 2.3 kg Certificates Compliance certificates: CE, Federal Communications Commission (FCC) Management features Switch type: Managed Switch layer: L2 Other features Warranty period: 2 year(s) Design Rack mounting: Yes Stackable: Yes Form factor: 1U Product colour: Black Reset button: Yes LED indicators: Activity, Link, Power, Speed, Status Number of fans: 2 fan(s) Electromagnetic compatibility: CLASS B Power over Ethernet (PoE) Power over Ethernet (PoE): No Logistics data Country of origin: Taiwan Products per master (outer) case: 7 pc(s) Sustainability Sustainability compliance: YesVis mereVis mindre
