NORLYS

NORLYS Asker DC1310BL black LED garden bollard, 55 cm, 24 V DC

Name: NORLYS Asker DC1310BL black LED garden bollard, 55 cm, 24 V DC
Brand: NORLYS

NORLYS Asker DC1310BL is a black LED garden bollard measuring 55 cm in height, with a powder-coated aluminium body. A rectangular upright and projecting horizontal head form an inverted L. The light source sits beneath that head rather than inside an exposed shade at the top of the post.Downward light beside outdoor routesThe shielded distribution directs light downwards. This makes the fitting appropriate beside paths on private grounds, terrace edges or driveway margins when the aim is to illuminate the surface around the bollard. Spacing several fittings requires the photometric data and the layout of the site; height alone does not establish a suitable distance between them.Two LED modules provide warm white light at 3000 K. The complete luminaire delivers 533 lm, which describes the light leaving the fitting rather than the higher output of the modules themselves. Luminaire power is 8.5 W. The LED sources form part of the assembly and can be replaced by a professional service, not by changing an ordinary user-replaceable bulb.A 24 V installation needs an external supplyDC1310BL operates on 24 V DC and requires an external constant-voltage power supply. It is not intended for direct connection to 230 V mains. Its LED modules support dimming, but the actual control arrangement depends on the installation design and the selected supply. A suitably qualified person must select the power supply and carry out the electrical installation.Dimensions, finish and fixing requirementsThe overall dimensions of 55 × 20 × 11 cm let you assess the projecting head in relation to an adjacent walkway before choosing its position. Black RAL 9005 and the restrained right-angled shape suit modern, minimalist and Scandinavian landscaping. The light cover is transparent, structured, UV-stabilised polycarbonate, rather than an opal diffuser.The fitting has IP65 protection and an IK10 impact rating. It is fixed through four 8 mm holes with 18 × 50 mm spacing. Mounting screws are not supplied, while ground anchors and mounting adapters are purchased separately to suit the supporting surface.Näytä lisää

alk. 241,73 €

1 tarjous

Näytä tarjoukset