LED Labs

LED strip PRO 3Y 24V 120 LED/m 4040 SMD RGB, 18W, 600 LEDs, 5 m

Name: LED strip PRO 3Y 24V 120 LED/m 4040 SMD RGB, 18W, 600 LEDs, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series comes with Blue Tape mounting tape. RGB Discover the possibilities of LED tapes with the RGB color palette. Choose any color and create an amazing atmosphere in any room. RGB LED tape can be used as a decorative element in the living room, bathroom or children's room. RGB tape requires the installation of an LED driver. Voltage 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. Tape 600 LED 4040 SMD The density of the tape is the number of LEDs on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. Strips with a density of 120 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. IP20 LED strip The IP20 parameter for LED strips defines the most common degree of waterproofing found on the market. IP20 LED strips are designed for use wherever there is no danger of excessive moisture or exposure to water. The LED strip specified with such a class of waterproofness allows exposure to dry dust and dust, thanks to the protective layer that the LEDs mounted on the strip are covered with. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Requires LED driver RGB LED strips need a LED driver to work properly. It is through it that it is possible to change the color of the LED strip. The controller is mounted behind the power supply, so it is important to choose the right voltage. Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. Deciding to install professional LED tape, we are almost 100% sure that each roll of tape will have the same color and light output.