LED Labs

LED strip PRO 3Y 24V 900 LED 2835 SMD 8W WW 180lm/W, 5 m

Name: LED strip PRO 3Y 24V 900 LED 2835 SMD 8W WW 180lm/W, 5 m
Brand: LED Labs

LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each LED strip in the 3Y series comes with Blue Tape mounting tape. Warm white color The warm white color of the lighting will emphasize the cozy character of the room. It will work well in apartments, especially in the bedroom and living room. Will help you relax and calm down. It is a color reminiscent of that known from traditional incandescent bulbs. IP20 LED strip IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The absence of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI above 80 allows for more natural and pleasant color reproduction on the illuminated objects. Tape 900 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Tape density is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. LED strips with a density of 180 LED/m are strips that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.