LED Labs

LED strip PRO 3YB 24V 2835 SMD Neutral White, 6W, 300 LEDs, 5 m

Name: LED strip PRO 3YB 24V 2835 SMD Neutral White, 6W, 300 LEDs, 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. Neutral white color Neutral color is the closest to sunlight. It will find use wherever our eyes are forced to strain: at work, in the office in the home premises. It is the most versatile light color. IP20 LED strips IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. See the colors in their natural shades High CRI value guarantees the highest color quality of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. LED 24V tapes - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. Tape 300 LED 2835 SMD The 2835 diode is a small size diode, which is a more powerful version of the 3528 diode. Depending on the density of the LED tape, it will work well in most applications. The density of the tape is the number of LEDs on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. LED strips with a density of 60 LEDs per meter are strips in which it is possible to achieve uniform light. With the selection of the right profile and shade, you can achieve the effect of a line of light. Requires installation of power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.