LED Labs

PRO 3Y 24V 2640 LED COB Neon 15W CW RA90 tape, 5 m

Name: PRO 3Y 24V 2640 LED COB Neon 15W CW RA90 tape, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. A uniform line of light in your home! Thanks to the increased number of LEDs, it is possible to achieve a uniform line of light even when using a low D, Z, or SOLIS type aluminum profile. COB LEDs, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption. Cold white color The light of the cold white color tape introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP20 LED strip IP20 LED strips, although they do not have a silicone shield, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. Voltage 24V - lower voltage drops LED strips with a voltage of 24V are an increasingly popular choice among professionals designing LED lighting systems. Thanks to the use of increased voltage, LED strips allowing the use of longer lengths without the risk of voltage drops, which manifest themselves asymmetrical light intensity across the LED strip. Note that the choice of 24V LED strip is related to the selection of a suitable LED power supply. See the colors in their natural shades The value of the CRI coefficient ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.