LED Labs

PRO 3YB 24V 1600 LED COB 8W WW tape - 25m

Name: PRO 3YB 24V 1600 LED COB 8W WW tape - 25m
Brand: LED Labs

The 3Y basic series are LED strips embedded on a 2oz copper PCB substrate. They are covered by a 3-year warranty period. The LED tape comes with double-sided Blue Tape mounting tape. Warm white color The warm white color of the lighting will emphasize the cozy character of the room. It will work well in apartments, especially in the bedroom and living room. Will help you relax and calm down. It is a hue reminiscent of that known from traditional incandescent bulbs. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. IP20 LED tape LED strips with a degree of protection IP20 are covered with a thin protective layer, which protects them from the effects of fine dirt. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.Näytä lisää