partworks Markenset
Shock absorber conversion kit for PORSCHE 944 951 87- 968 Threaded sleeves + wrench SET
Shock absorber conversion kit for PORSCHE 944 951 87- 968 Threaded sleeves + wrench SET Conversion kit to Bilstein B6 Description: This kit provides a complete solution for converting pressed-in 944 front axle shock absorbers to bolted Bilstein B6 shock absorbers. The set includes 2 shock absorbers, 2 threaded sleeves, and 1 cartridge wrench, which is required to tighten the shock absorber retaining nut. Installation instructions are provided below.Procedure:1. Chisel open the crimp of the old shock absorber cartridges and pull out the damper cartridges.2. Shorten the tubes by 44.5 mm.3. Remove the zinc coating from the threaded sleeves in the welding area.4. Carefully hammer the threaded sleeves into the tubes and weld them securely all around. (Before welding, check that the gap between the tube and the threaded sleeve is correct. The damper cartridge must be able to be tightened with the nut by 5 full turns.)5. Grind the weld smooth, paint it, and assemble the shock absorber.You can find a wide variety of other spare parts for your Porsche in our webshop. Brand Information: This product is a set of branded goods from renowned automotive suppliers, created by partworks. If we indicate the manufacturer of the components, for example, on the packaging, then it will also be a component of that manufacturer. Please remember that even the largest suppliers sometimes trade goods among themselves. However, you can always rely on high quality standards for our components. Additional Information: ● Shock absorber design: Monotube upside-down ● Shock absorber type: Gas pressure ● Specification: 150/95 Reference numbers: Please note, this product is a component of the part with the following OE number(s). Our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. For ease of finding and identification, the OE numbers of the corresponding assembly are listed here: 477412059A Scope of delivery: As shown in the illustration Suitable for: 944 '87- 944 turbo (951) '87- 968 Vehicles with pressed-in Fichtel & Sachs shock absorbersNäytä lisää
Tarjous
Kaikki hinnat sis. alv:n; toimituskulut kaupan syötteen mukaan. Klikkaus vie suoraan kaupan tuotesivulle.
Hintakehitys (alin hinta)
2026-07-14 – 2026-07-26min 473,26 € · max 473,26 €
Tuotetiedot
- Merkit
- partworks Markenset
- GTIN
- 04251750519915
- Kategoriat
- Ajoneuvot ja niiden osat > Ajoneuvojen osat ja lisävarusteet > Moottoriajoneuvojen osat
