Zambelis

Curved magnetic track 48V Ø1200 mm black 22102 Zambelis

Name: Curved magnetic track 48V Ø1200 mm black 22102 Zambelis
Brand: Zambelis

22102 is a curved section of 48 V magnetic track from the Zambelis 48V Circles – Curved Magnetic System. The segment covers 120° of a 1200 mm circle, so three of them close into a full ring; two form a C, and mixing diameters builds waves and S-curves. The extrusion is 28 mm wide and 56 mm tall, with a 23 mm magnetic channel for the fittings. The track alone — no fittings, no driver This is a structural part of a system, not a luminaire. What you receive is the curved aluminium profile in a sandy black finish: no light modules, no driver, no supply lead. Working voltage is 48 V extra-low voltage, so a separate 220–240 V to 48 V driver is required — either the linear pendant base with a built-in driver (100 W or 200 W) or a remote driver of 60, 100 or 150 W tucked into the ceiling. Power reaches the track through a plastic feeder with a 300 mm or 2000 mm cable. Surface-mounted or suspended The track can be screwed straight to the ceiling or hung from wires. The suspended version needs kit 22121 — two adjustable 2 m wires — which the manufacturer sells separately. Neighbouring arcs are joined with the 22097-C mechanical connector, and open ends are closed with 22097-E caps. The IP20 rating keeps the whole assembly in dry indoor spaces. Why a curved magnetic track The magnetic channel lets a fitting clip in anywhere along the profile and move later without tools and without dismantling anything — that is the point of the system. A single arc can carry directional spots and diffused linear modules at the same time, and the arrangement can change whenever the room does. Ø 1200 mm is the largest of the three radii on offer; the smaller arcs are 22097 (Ø 900 mm) and 22090 (Ø 600 mm), and 22103 is the trimless equivalent. Specification Manufacturer code: 22102 Type: curved 48 V magnetic track section, 120° of arc Circle diameter 1200 mm (radius 600 mm), arc length 1252.5 mm Profile: 28 mm wide, 56 mm tall, 23 mm magnetic channel Working voltage 48 V (driver not included) Material aluminium, Sandy Black finish Installation: surface or pendant (suspension kit 22121, sold separately) IP20, indoor use System accessories: feeder 22095 / 22120, curved connector 22097-C, end caps 22097-E Gross weight 1.55 kg, package 110 × 40 × 16 cm Warranty 5 yearsNäytä lisää

alk. 203,63 €

1 tarjous

Näytä tarjoukset