LED Labs

Tape PRO 3Y 12V 300 LED 5050 SMD 12W CW IP65HS, 5 m

Name: Tape PRO 3Y 12V 300 LED 5050 SMD 12W CW IP65HS, 5 m
Brand: LED Labs

LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Cold white color Cold white color is a color with a blue glow. Mounted in a room, it gives a sense of sterility. Cold color of white light stimulates the body to work. It will work well where focus is needed. IP65HS LED strip IP65HS LED tape is covered with a shrink wrap, which tightly covers the tape. This provides increased protection against moisture. Since the shrink band is thinner than the silicone layer, IP65HS tapes have a higher luminosity than tapes with the same parameters with IP65 protection. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emissions. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI of more than 80 allows for more natural and pleasant color reproduction on the illuminated objects. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes. The increased size allows for greater light emission.The density of LED tape determines how many LEDs are on a meter of tape. The more LEDs per meter of LED tape, the more uniform and powerful the light. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).