LED Labs

Tape PRO 3Y 24V 2640 LED COB 10W NW RA90 IP67, 5m

Name: Tape PRO 3Y 24V 2640 LED COB 10W NW RA90 IP67, 5m
Brand: LED Labs

A distinctive feature of the tape is the use of COB (Chip on Board) diode in it. The use of COB technology makes it possible to achieve a uniform line of light. An additional advantage of using COB LED in LED strips is a wider angle of light dispersion and high light efficiency. COB LEDs emit a far superior beam of light compared to older LED technologies at lower power consumption. LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS, IP65 and IP67 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each LED strip in the 3Y series comes with Blue Tape mounting tape. Neutral white color LED tape designed to be used as an element of the main room lighting, for the construction of LED fixtures, to illuminate exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. IP67 LED strip IP67-rated LED COB strips allow use in areas exposed to moisture and water. They will work well as lighting for terraces, gardens and in rooms prone to steam and splashing. Enjoy a uniform line of light wherever you need it! LED strips 24V - lower voltage drops LED strips with 24V are an increasingly popular choice among professionals designing LED lighting systems. Thanks to the use of increased voltage, LED strips allowing the use of longer lengths without the risk of voltage drops, which manifest themselves asymmetrical light intensity across the LED strip. Note that the choice of 24V LED strip is related to the selection of a suitable LED power supply. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.