Audio Technica

Audio Technica PRO35 Cardioid Condenser Clip-On Instrument Mic

Name: Audio Technica PRO35 Cardioid Condenser Clip-On Instrument Mic
Brand: Audio Technica

Cardioid condenser clip-on microphone designed for sax, toms, brass and percussion. It handles high SPL, 145 dB at 1% THD, which is what lets it sit inside a horn bell or on a tom rim without collapsing, and the extended response still picks up the quieter detail of a performance. The supplied AT8418 UniMount clip sets position accurately and isolates the element from shock, while the cardioid pattern rejects the rest of the stage arriving from the sides and rear. Cardioid Pattern 145 dB Max SPL 50–15k Hz Response 8g Weight Three versions exist. This is the wired onePRO35 is the wired model: it terminates on TA3F and runs through the supplied AT8538 phantom power module to a 3-pin XLR. If you need it on an Audio-Technica body-pack transmitter instead, order the PRO35cH (screw-down 4-pin, cH-style) or PRO35cW (locking 4-pin, cW-style): the cable is permanently attached, so the connector cannot be changed later. Phantom power is requiredThe AT8538 module needs 11–52V DC phantom from your desk or preamp. The 80 Hz high-pass filter and the flat/roll-off switch live on that module, not on the microphone. Features Cardioid pattern rejects sound from the sides and rear for better isolation Handles up to 145 dB SPL, suits brass, toms and percussion Extended 50–15,000 Hz frequency response AT8418 UniMount clip included for accurate positioning and shock resistance AT8538 in-line phantom power module included, with 80 Hz high-pass filter Flat / roll-off switch on the power module 1.8m miniature cable permanently attached, terminated on TA3F Microphone weighs just 8g Soft protective pouch included Specifications Brand Audio-Technica Manufacturer part number PRO35 Type Clip-on instrument microphone Element Fixed-charge back plate, permanently polarised condenser Polar pattern Cardioid Frequency response 50–15,000 Hz Low frequency roll-off 80 Hz, 18 dB/octave Open circuit sensitivity -45 dB (5.6 mV) re 1V at 1 Pa Maximum input sound level 145 dB SPL, 1 kHz at 1% THD Dynamic range 115 dB, 1 kHz at max SPL Signal-to-noise ratio 64 dB, 1 kHz at 1 Pa Phantom power 11–52V DC, 2 mA typical Switches Flat, roll-off Cable 1.8m permanently attached, 2.6mm diameter, 2-conductor shielded, TA3F connector Output connector Integral 3-pin XLRM on the power module Microphone dimensions 25.0mm long x 10.2mm diameter Power module dimensions 92.9mm long x 18.9mm diameter Microphone weight 8g Power module weight 81g Accessories included AT8418 UniMount mount, AT8538 power module, soft protective pouch Case style M12Show more

from £158.00

1 offer

See all offers