Aviom

Aviom AN-16/o v.4 Pro16 16 Channel Output Module, Balanced Analogue Outputs on DB25, 1U Rack

Name: Aviom AN-16/o v.4 Pro16 16 Channel Output Module, Balanced Analogue Outputs on DB25, 1U Rack
Brand: Aviom

The Aviom AN-16/o v.4 is a 1U Pro16 output module that converts a 16-channel A-Net stream to 16 balanced analogue outputs on two DB25 multipins. Output level is switchable per channel pair to +24, +18 or +4 dBu, or mic level. It is used for digital snake splits, recording feeds and, with A360/A640 mixers on a D800, to feed wireless in-ear transmitters via Network Mix Back, in houses of worship, touring and studios. 16Balanced outputs+24 dBuMax output level48 kHz24-bit D/A1URack height Pro16 systemThis is a Pro16 A-Net device for use with Aviom personal mixers, AN-16 modules and D400/D800 A-Net Distributors. To use it on a Pro64 network, an ASI A-Net Systems Interface is required. Serial number noteAviom states that AN-16/o v.4 units with serial numbers 51162 and lower (2013 and earlier) only support the original Pro16 A-Net protocol, not the Pro16e protocol used by the AN-16/i v.2, D800 and D400. Not includedDB25 breakout cables are not included. Features16 balanced analogue outputs on two DB25 multipins (Tascam analogue pinout)Four-position output level switch per channel pair: +24, +18, +4 dBu or mic48 kHz, 24-bit D/A convertersSignal present and clip LEDs per channelConnects to any Pro16 input module, console card or A-Net DistributorA-Net expansion port for 32-channel streams on one cable; SB4 System Bridge for up to four streamsOutputs Network Mix Back stereo mixes from up to eight A640 or A360 mixers via a D800 SpecificationsOutputs16, balanced, 2x DB25 (Tascam analogue pinout)Output levels+24 dBu, +18 dBu, +4 dBu, mic (per channel pair)Maximum output level+24 dBuOutput impedance226 ohm (+18 and +24 dBu); 100 ohm (+4 dBu and mic)D/A conversion48 kHz, 24-bitFrequency response4 Hz to 22 kHz, +0.2/-3 dBTHD+NShow more

from £2,139.00

1 offer

See all offers