ChamSys

ChamSys GeNetix GN10P 10 Port RDM DMX Node, Phoenix Terminal DMX In and Out, 1U Rack

Name: ChamSys GeNetix GN10P 10 Port RDM DMX Node, Phoenix Terminal DMX In and Out, 1U Rack
Brand: ChamSys

The ChamSys GeNetix GN10P is the Phoenix terminal connector variant of the 10-port 1U rack node, suited to permanent installations where screw-terminal DMX connections are preferred over XLR or RJ45. All 10 ports support Art-Net, sACN, and RDM, and each can be set as a DMX input or output. It also has LTC timecode in/out, MIDI in/out, a 10Scene port, and a front-panel display and encoder for local setup. Connected to a MagicQ PC by USB-C it fully unlocks MagicQ. Power comes from PoE on network port 1 or mains via Neutrik powerCON TRUE1 (cable included).10DMX Ports1U RackFormat · 19"PhoenixConnectors · screw terminal1U Rack FormatGN10 series nodes are 1U rackmount units with 10 DMX ports and two network ports. On the GN10P each DMX port is a Phoenix screw terminal rather than an XLR, so you wire DMX cable straight in. That suits fixed installations with hard-wired DMX runs, or short tails made up to a 5-pin XLR where you need a plug-in point. Suited to permanent installations where a reliable, high-density node in a standard rack is preferred over distributed wall-mount nodes.FeaturesArt-Net 4 and sACN (E1.31) protocol supportFull RDM (Remote Device Management) on all portsConfigurable DMX timing, frame rate and inter-packet gapBuilt-in web server for browser-based configurationAuto-discovery from ChamSys MagicQ consolesPoE on network port 1, or mains via powerCON TRUE1Status LEDs per DMX port for live monitoringPhoenix screw-terminal connectors for permanent wiring1U 19" rack mount formatSpecificationsDMX Ports10 (Phoenix terminals)Format1U 19" rackProtocolsArt-Net 4, sACN E1.31RDMYesEthernetDual portShow more

from £1,321.00

1 offer

See all offers