CYP

CYP AU-DTO4-RX Dante Receiver, 4 Balanced Mono Outputs, PoE

Name: CYP AU-DTO4-RX Dante Receiver, 4 Balanced Mono Outputs, PoE
Brand: CYP

Taking audio off a Dante network, the AU-DTO4-RX delivers up to four channels to balanced analogue outputs on 3-pin terminal blocks. Volume and mute are configurable per output, and the unit runs entirely from PoE, so one network cable carries both audio and power. Typical jobs include feeding powered speakers, amplifiers or a local mixer at the far end of a Cat5e or Cat6 run. 4Balanced outputs 4VrmsMax output level PoE802.3af power ~1msTypical latency PoE switch and Dante software neededThe AU-DTO4-RX is powered only by PoE (802.3af) from the network switch, with no local power input listed. Basic setup needs a serial over USB connection, and audio routing is done in third-party Dante control software. Features Four balanced analogue mono outputs on 3-pin terminal blocks Configurable volume and mute per output Receives up to 4 channels from any Dante source Powered by PoE (802.3af) from the network switch Low latency, typically around 1ms Setup via serial over USB, routing via Dante control software Specifications BrandCYP ModelAU-DTO4-RX Network1x RJ45 Dante Outputs4x balanced analogue mono (3-pin terminal block) Service portUSB Micro Max output level4Vrms Output impedance499Ω S/N ratio>87dB (1kHz, 0dBFS) LatencyTypically around 1ms PowerPoE (802.3af) Power consumption6W ChassisAluminium, black Dimensions128 x 25 x 108mm (W x H x D) Weight360gShow more

from £256.00

1 offer

See all offers