partworks
4x sealing set injectors for PORSCHE 924S 944 from '86-951 with filters
4x sealing set injectors for PORSCHE 924S 944 from '86-951 with filters Description: The sealing set includes all sealing elements located on the injector. In addition, a new Bosch filter insert is also included, which you should replace during the overhaul. You can use the special tools available from us to remove it. You can also find the right plugs in our shop. Make sure you have a clean working environment and carefully clean the injector before installing the new elements. Tip: To clean the nozzles, we recommend placing them in an ultrasonic bath or using special injector cleaning agents, usually available in a spray can. The very robust Bosch nozzles can also be flushed through with compressed air without any concerns and very effectively. Expensive cleaning in special injector cleaning systems is therefore hardly necessary. Cleaning sprays are available, for example, from the “Caramba” brand. Note: After installation, please be sure to check that the sealing elements are correctly seated and that they are working properly. Brand information: partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand. Reference numbers: Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here: 930.606.120.01 951,606,110.00 944.110.901.00 PCG.606.120.00 930,606,120.00 Scope of delivery: Seal set including filter for 4 cylinders Suitable for: 924 2.5 S 85 -88 944 2.5 August 1985 to July 1988 / 2.5 Turbo
Προσφορά
partworks4,9(269)
Σε απόθεμα · Αποστολή: 3,90 €Αποστολή από 🇸🇰 SK → 🇬🇷
21,90 €
Σύνολο: 25,80 €
Όλες οι τιμές με ΦΠΑ· έξοδα αποστολής σύμφωνα με το feed του καταστήματος. Το κλικ οδηγεί απευθείας στη σελίδα του προϊόντος στο κατάστημα.
Ιστορικό τιμής (χαμηλότερη τιμή)
2026-07-15 – 2026-07-26min 21,90 € · max 21,90 €
Λεπτομέρειες προϊόντος
- Μάρκες
- partworks
- GTIN
- 04251750512503
- Κατηγορίες
- Οχήματα και ανταλλακτικά > Εξαρτήματα και αξεσουάρ οχημάτων > Εξαρτήματα μηχανοκίνητων οχημάτων
