LED Labs

LED strip PRO 3Y 5050 SMD RGB IP65HS, 14.4W, 300 LEDs, 5 m

Name: LED strip PRO 3Y 5050 SMD RGB IP65HS, 14.4W, 300 LEDs, 5 m
Brand: LED Labs

LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. RGB LED Tape RGB LED tape is a multicolor tape with the possibility to choose any color from the RGB palette. The tape will work well as a decorative element in apartments, restaurants, clubs. A driver is required to change colors. IP65HS LED strip IP65 Heat Shrink is a solution of using a heat shrink band around the entire LED strip. Unlike the silicone coating with which classic IP65 LED strips are protected, this allows the LED strips to maintain high light performance with very high resistance to moisture and splashes. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the often encountered 3528 and 2835 diodes.LG Tapes The density of LED tapes indicates the number of diodes per meter of LED tape. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. LED tapes with a density of 60 LEDs per meter are tapes in which it is possible to obtain uniform light. With the selection of the right profile and shade, you can achieve the effect of a line of light. Requires installation of power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 12V tapes need a power supply with an output voltage of 12V (24V). Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation. Requires installation of LED driver RGB LED strips need an LED driver to work properly. It is through it that it is possible to select color parameters from the RGB color palette. The controller is mounted behind the power supply, so it is important to choose the right voltage. Why choose a professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).