LED Labs

LED strip PRO 3YB 24V 2835 SMD Cold White, 6W, 300 LEDs., 5 m

Name: LED strip PRO 3YB 24V 2835 SMD Cold White, 6W, 300 LEDs., 5 m
Brand: LED Labs

3Y Basic LED strips feature a 3-year warranty period. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED tape comes with double-sided Blue Tape mounting tape. Cold white color Cold white color lighting has stimulating properties. Such lighting is used in workplaces, offices or co-working spaces. Cool shades of light give the impression of sterility, which is why they are often used in cosmetic, dental or medical offices. IP20 LED strips IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. See the colors in their natural shades LED tape designed for use as an element of the main lighting of rooms, for the construction of LED fixtures, to illuminate exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. LED strips 24V - lower voltage drops Thanks to 24V voltage, we can connect up to twice as long sections of LED strip when connecting in series than it is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Tape 300 LED 2835 SMD The 2835 diode is a small size diode, which is a more powerful version of the 3528 diode. Depending on the density of the LED tape, it will work well in most applications. The density of the tape is the number of LEDs on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. LED strips with a density of 60 LEDs per meter are strips in which it is possible to achieve uniform light. With the selection of the right profile and shade, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.