LED Labs

PRO 3Y 24V 2640 LED COB 10W 2700K RA90 HS tape, 5 m

Name: PRO 3Y 24V 2640 LED COB 10W 2700K RA90 HS tape, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. A uniform line of light in your home! Thanks to the increased number of LEDs, it is possible to achieve a uniform line of light even when using a low D, Z, or SOLIS type aluminum profile. COB LEDs, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption. Ultra warm white color Ultra warm white color is most similar to the light of traditional incandescent lamps. Light sources of this color will be ideal in rooms used for rest and recreation. Warm light is used in homes and apartments, making rooms more cozy. IP65HS LED strip LED strips IP65 Heat Shrink is a product with increased resistance to moisture and splashing. Thanks to the use of a special shrinking band, which differs in its characteristics from the traditional silicone coating found in waterproof tapes makes it a modern solution for better color uniformity than is the case with LED tapes with the classic IP65. Such a solution allows to maintain high lighting performance wherever we need increased resistance to moisture and splashing. Voltage 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.