LED Labs

PRO 3YB 12V 2400 LED COB 10W CW tape, 5 m

Name: PRO 3YB 12V 2400 LED COB 10W CW tape, 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. A characteristic feature of COB LED tape, is the use of a special COB (Chip on Board) diode in it.. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. COB LEDs emit a uniform line of light compared to older LED technologies with lower power consumption. Cold white color LED strip in cold white color, is intended as a decorative element indoors. Due to the ability of high light dispersion, lighting is richly used in creating lighting arrangements, as well as in accentuating selected components of equipment.. It does a good job in rooms where we need a feeling of sterility. It introduces a feeling of coolness into the room, so it is used in places where we want to relax. It also works well in offices, production spaces, garages or as strong lighting for advertisements or stores. IP20 IP20 LED strips, although they do not have a silicone shield, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. Power supply required The LED strip requires the installation of a power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED stripΕμφάνιση περισσότερων