LED Labs

PRO 3YB 24V 1600 LED COB 8W NW tape - 25m

Name: PRO 3YB 24V 1600 LED COB 8W NW tape - 25m
Brand: LED Labs

The 3Y basic series are LED strips embedded on a 2oz copper PCB substrate. They are covered by a 3-year warranty period. The LED tape comes with double-sided Blue Tape mounting tape. Neutral white color LED tape designed to be used as an element of the main room lighting, for the construction of LED fixtures, to highlight exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. LED strips 24V - lower voltage drops Thanks to 24V voltage, we can connect up to twice as long sections of LED strip when connecting in series than it is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. IP20 LED tape LED strips with a degree of protection IP20 are covered with a thin protective layer, which protects them from the effects of fine dirt. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.