LED Labs

PROFI 24 V 1600 LED SMD 14 W 4000 K tape

Name: PROFI 24 V 1600 LED SMD 14 W 4000 K tape
Brand: LED Labs

Choosing an LED strip with high luminous efficiency is a conscious decision that combines environmental and economic benefits. Thanks to the higher lumens per watt (lm/W), it is possible to achieve the desired light intensity with much lower energy consumption. The result is a significant reduction in operating costs, as well as minimizing the carbon footprint and actively contributing to environmental protection. The PROFI series of LED strips is a line of products designed for professionals. PROFI LED strips are branded by LED Labs Lighting and covered by an extended warranty period. By using a PCB backing with a copper content of 3 oz, it has been possible to significantly increase their service life. PROFI series also means noticeably lower voltage drops compared to standard LED strips. PROFI series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Neutral white color Neutral white color is a universal color of light. The light of LED tape is not tiring to the human eye, so it can be used in places where we spend a lot of time: offices, apartments IP20 LED tape IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The absence of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI of more than 80 allows for more natural and pleasant color reproduction on the illuminated objects. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.