LED Labs

Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W NW RA90 HS, 5 m

Name: Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W NW RA90 HS, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Neutral white color LED tape designed for use as an element of the main room lighting, for the construction of LED fixtures, to illuminate exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. IP65HS LED strip IP65HS is IP65 waterproof with higher light performance. The heat-shrinkable band with which the tape is covered is thinner than the silicone coating. The tape remains waterproof, so it can be used in areas with high humidity. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 300 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 300 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires a low 12V DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.