LED Labs

Tape PRO 3Y 24V 300 LED 5050 SMD 14.4W RGB - 25m, 5 m

Name: Tape PRO 3Y 24V 300 LED 5050 SMD 14.4W RGB - 25m, 5 m
Brand: LED Labs

LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. RGB LED Tape RGB LED tape is a basic variant of color-changing tapes. With its wide spectrum of colors, it is often used as club or restaurant lighting to create the right character for places. It can be successfully used as stylish overhead lighting, lighting behind the TV or under the bed. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. LED strips 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a tape with a voltage of 24V. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. Requires the installation of a power supply LED tape requires installation of a power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver RGB LED strips need a LED driver to work properly. It is through it that it is possible to select color parameters from the RGB color palette. The controller is mounted behind the power supply, so it is important to choose the right voltage.Εμφάνιση περισσότερων