LED Labs

Tape PRO 3Y 24V 700 LED 2835 SMD 12W NW RA90 -25m, 5 m

Name: Tape PRO 3Y 24V 700 LED 2835 SMD 12W NW RA90 -25m, 5 m
Brand: LED Labs

LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each LED strip in the 3Y series comes with Blue Tape mounting tape. Neutral white color LED tape designed to be used as an element of the main room lighting, for the construction of LED fixtures, to illuminate exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. 24V voltage - lower voltage drops LED strips with 24V voltage are an increasingly popular choice among professionals designing LED lighting systems. Thanks to the use of increased voltage, LED strips allowing the use of longer lengths without the risk of voltage drops, which manifest themselves asymmetrical light intensity across the LED strip. Note that the choice of 24V LED strip is related to the selection of a suitable LED power supply. See the colors in their natural shades The value of the CRI coefficient ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 700 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get.LED tapes with a density of 140 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.