NORLYS

Outdoor Wall Light NORLYS Lillehammer 2285CS corten LED 4.5 W 4000 K DALI2 upward 4°

Name: Outdoor Wall Light NORLYS Lillehammer 2285CS corten LED 4.5 W 4000 K DALI2 upward 4°
Brand: NORLYS

Lillehammer 2285CS is an outdoor wall light shaped as an upright rectangular block of cast aluminium, powder-coated in a corten-steel colour (close to RAL 8011 — the colour of the coating, not the material). The safety-glass window is in the top face only, so it shines only upwards. The LED module and driver are built in. What light it gives The optic has a beam of just 4°, so instead of lighting its surroundings it draws a narrow, sharp stripe up the wall. Hence the two different figures on the datasheet: the LED module is rated at 504 lm, while 15 lm leaves the luminaire at a draw of 4.5 W. It is meant for accenting a façade — a pilaster, a recess or a row of fittings along a wall — not for lighting an entrance or a terrace. All the light goes up (ULOR 100 %, BUG B0-U2-G0), which matters where rules limit light aimed at the sky. 4000 K is neutral white, and SDCM3 keeps several lights on one wall in the same tone. The light source has energy class C. DALI-2 control The DALI/TD driver is controlled in a DALI-2 system: the luminaire receives digital commands over a separate control line from a DALI controller or gateway. An ordinary phase dimmer cannot control this driver, so it suits an installation with an existing or planned DALI bus. Size and installation The body is 18.5 cm high and 8 cm wide, projects 11 cm from the wall and weighs 1.6 kg. It is fixed through two ø5 mm holes spaced 45 × 130 mm. The terminals take up to five 1.5 mm² conductors, also for loop-through wiring of several lights on one line; the EPDM gland seals a round cable of ø7–10.5 mm. It is Class I, so a protective earth is required. The manufacturer allows up to 74 of these lights on one B16 circuit breaker, or 46 on a B10. Durability and service IP65 lets it stay on an unroofed wall, and IK08 protects it from knocks within reach. It works from −20 to +45 °C. The module keeps 90 % of its flux after more than 52,600 h (L90) and 80 % after more than 102,000 h (L80); the driver is rated for 50,000 h. Only a professional service replaces the module and control gear (repair kit ZS2285ZX0009).Show more

from 196,74 €

1 offer

See all offers