V-TAC

Wall-mounted PIR motion sensor V-TAC VT-81008, white, 240°, IP65

Name: Wall-mounted PIR motion sensor V-TAC VT-81008, white, 240°, IP65
Brand: V-TAC

V-TAC VT-81008 is a white wall-mounted PIR motion sensor for automatic control of compatible lighting. It detects movement across an observation angle of up to 240°, with a stated detection distance of up to 14 m. The PC housing measures 100.3 × 75 × 62 mm, allowing discreet placement by an entrance, passageway or technical area.Lighting control to suit the settingThe unit operates from AC 220–240 V at 50/60 Hz and is intended for LED loads up to 1000 W. Its delay time, ambient-light level and detection range can be adjusted for the particular installation. The stated sensor response speed is 0.6–1.5 m/s, while the delay can be set from approximately 10 seconds to 15 minutes.Installation and useIP65 protection supports use in sheltered indoor and outdoor installations. The manufacturer identifies corridors, staircases, garages, utility rooms and technical spaces as typical applications. Before connection, plan the mounting position in relation to the area to be monitored and ensure that the controlled circuit matches the required parameters.model: VT-81008 / SKU 24111technology: infrared PIR sensorhousing colour: whiteprotection rating: IP65warranty: 5 yearsThis is a practical choice where lighting should respond to presence rather than remain on continuously.Its round form and neutral white finish suit common mounting surfaces. The sensor controls a lighting circuit; it is not a luminaire or light source. Always assess the load rating in relation to the complete connected installation.Több megjelenítése

7938 Ft-tól

1 ajánlat

Ajánlatok megtekintése