LED Labs

LED strip PRO 3YB 2835 SMD Cold White IP65HS, 12W , 600 LEDs, 5 m

Name: LED strip PRO 3YB 2835 SMD Cold White IP65HS, 12W , 600 LEDs, 5 m
Brand: LED Labs

3Y Basic LED strips feature a 3-year warranty period. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED tape comes with double-sided Blue Tape mounting tape. Cold white color The light of the tape with a cold white color introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. Water protection with no loss of luminous flux IP65HS LED strips are covered with heat-shrinkable film, which under the influence of temperature tightly covers the LED strip. Such a cover allows for increased waterproofing while maintaining high light performance. Increased waterproofing is achieved through the use of a thin band layer, which usually translates into higher lumen output and greater color uniformity than analogous IP65 tapes. See the colors in their natural shades High CRI value guarantees the highest color quality of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. Tape 600 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. It is a more powerful alternative to the 3528 LED. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the strip is placed and the lampshade. LED strips with a density of 120 LED/m are strips that allow you to obtain uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires a low 12V DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.Több megjelenítése

10 629 Ft-tól

1 ajánlat

Ajánlatok megtekintése