partworks

2x Tie Rod + Steering Boot for PORSCHE 928 4.5 S -'85 OE Manufacturer

Name: 2x Tie Rod + Steering Boot for PORSCHE 928 4.5 S -'85 OE Manufacturer
Brand: partworks

2x Tie Rod + Steering Boot for PORSCHE 928 4.5 S -'85 OE Manufacturer Good and affordable - Also available as a premium version Description: The joints on tie rods are subject to wear, which usually starts with a torn boot. Once the grease has been washed out of the axial joint or tie rod end, the ball joint will fail within a few thousand kilometers. At the latest, the defective rubber boots or ball joints will be flagged during the vehicle inspection (TÜV). Depending on the Porsche model, the tie rods can consist of two or three main components. These include the axial joint as the inner ball joint in front of the steering gear and the so-called tie rod end at the outer end of the tie rod. Sometimes the axial joint and tie rod end are directly connected, as with the 924/944 and 968. Because replacing the tie rod always requires a new wheel alignment with toe adjustment, it is advisable to replace the entire tie rod depending on its condition. On the 924/944, the tie rods differ in length AND whether they have internal or external threads at the end. If in doubt, you can check your thread type and compare them visually. Another difference: Starting with the 1987 model year, the 944 received the so-called "wide axle." The tie rod ends of cars with power steering and/or a wide axle always have external threads and are screwed onto the rods. Brand Information: Partworks GmbH is a German company specializing in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. Worldwide, over 130,000 car enthusiasts are already satisfied customers of the Paderborn-based company. As specialists in classic car parts, we are well aware of our customers' high quality standards. Therefore, you can be confident that our redesigned parts meet the exact specifications of the originals and, in some cases, even exceed them. With our own engineering department and internal testing, we can guarantee the reliability of our products. Our DIN ISO 9001-certified quality management system further confirms the thoroughness of our work. If you see the manufacturer's name "partworks," it indicates either an in-house development or an original equipment manufacturer (OEM) part (OE quality). OEMs are the manufacturers who supplied the original product to the vehicle manufacturer but cannot sell it under their own brand on the open market. Reference numbers: 928.347.031.10 928.347.191.03 928.347.031.01 928.347.031.03 928.347.191.02 Scope of delivery: As shown in the illustration Fits: 928 4.5/928S up to 12/85 NOT for 928 from model year 1986 ->these require #1237 Tie rod length without tie rod end 255mm