Multi-Gigabit access switch with PoE+ This 28-port multi-Gigabit access switch with Power over Ethernet is the perfect choice for scenarios with data-intensive network components that do not require complex electrical installations. 12 out of 24 Gigabit Ethernet ports support 2.5 Gigabit Ethernet and thus form the necessary powerful basis e.g. for the operation of Wi-Fi 6 access points and other network components with high-performance requirements. A further 4x SFP+ ports and basic Layer 3 functions such as static routing and DHCP make this an intelligent management device with numerous security features for small and medium-sized networks. High performance on 28 ports The LANCOM GS-3628XP is equipped with 12x 2.5-Gigabit Ethernet ports and 4 SFP+ ports that support transmission rates of up to 10 Gbps. With a data throughput of 164 Gbps on the backplane, it offers full performance even under load. This makes the multi-Gigabit access switch a high-performance basis for modern network infrastructures in any industry or field of application. A high-performance basis for Wi-Fi 6 Thanks to 12 high-performance 2.5-Gigabit Ethernet ports, the LANCOM GS-3628XP is the ideal LAN-side basis for integrating the new Wi-Fi 6 standard into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5-Gigabit Ethernet, as the performance requirements exceed those of a 1-Gigabit Ethernet port. This switch in combination with the corresponding PoE performance enables the operation of up to 12 Wi-Fi 6 access points or other network components with high-performance requirements - without additional electrical installation. Central power supply without additional electrical installation The LANCOM GS-3628XP is a high-performance PoE switch that directly powers PoE devices connected to it: there is no need for additional power supply units or cabling. It supports the Power over Ethernet standards IEEE 802.3af and IEEE 802.3at (PoE+). Thanks to high power reserves with a total output of 370 watts, it is therefore ideal for efficient power supply of PoE terminals with high energy requirements. Static routing for fast data exchange The LANCOM GS-3628XP supports the basic layer-3 feature static routing and thus the shift of certain routing tasks from the router to the switch. Administrator-predefined network routes, through one or multiple network segments, enable fast data transfer, especially in scenarios with high data volumes, and relieve the router accordingly. Newly available router capacities can then additionally be used to manage external data traffic. As a result, the entire network efficiency is increased. Cloud-managed LAN With the LANCOM Management Cloud, the LANCOM GS-3628XP offers fast and easy network integration as well as automatic configuration assignment. Cloud-managed LAN replaces individual device configuration with holistic network orchestration and enables automatic VLAN assignment to the desired switch ports. This allows all configurations to be rolled out at the click of a mouse, making even more complex networking scenarios easy to administer. DHCP server functionality As a DHCP server, the switch can independently and automatically assign IP addresses to clients. The LANCOM GS-3628XP supports this basic layer-3 function and thus takes over the IP management of the connected network. Configurable access control The LANCOM GS-3628XP excludes rogue clients from gaining unauthorized access to the network. This is ensured by secured access control on all ports as per IEEE 802.1X (port-based, single-based, multi-based, and MAC-based). Secure remote management Secure communication protocols such as SSH, SSL, and SNMPv3 make the LANCOM GS-3628XP ideal for professional remote network management. The switch also supports the TACACS+ protocol for authentication, authorization, and accounting. This optimized solution promises maximum security for multi-site network management and monitoring. IPv6 and IPv4 support Thanks to its dual-stack implementation, the LANCOM GS-3628XP operates in pure IPv4, pure IPv6, or in mixed networks. Applications such as SSL, SSH, Telnet, or TFTP can continue to be operated on IPv6 networks. Supported IPv6 features include stateless auto-configuration, neighbor detection, and MLD snooping. Ports & interfaces Basic switching RJ-45 Ethernet ports quantity: 24 Basic switching RJ-45 Ethernet ports type: 2.5G Ethernet (100/1000/2500) Installed SFP modules quantity: 0 Installed SFP+ modules quantity: 0 Gigabit Ethernet (copper) ports quantity: 12 2.5G Ethernet (copper) ports quantity: 12 SFP+ module slots quantity: 4 Console port: RJ-45 Power connector: AC-in jack Weight & dimensions Width: 442 mm Depth: 375 mmShow moreShow less
