LANCOM
LANCOM GS-4530XP - LANCOM GS-4530XP, Managed, L3, 2.5G Ethernet (100/
Stackable full layer 3 multi-Gigabit access switch with PoE+ This fully managed multi-Gigabit access switch with Power over Ethernet and full layer 3 functions is the ideal solution for data-intensive infrastructures in enterprise environments. With its industry-standard port equipment, it offers the necessary performance even at high workloads and enables uplinking and stacking. Professional redundancy functions and LANCOM fail-safe stacking guarantee fail-safe operation with the best protection covered by the LANCOM Limited Lifetime Warranty (LLW). Orchestrated via the LANCOM Management Cloud, its configuration is automated. Advantages High performance on 30 ports The LANCOM GS-4530XP is equipped with 12x 2.5 multi-Gigabit PoE+ Ethernet ports, 12x Gigabit PoE+ Ethernet ports, as well as 4 SFP+ and 2 QSFP+ FleX ports supporting transmission rates of 10 and 40 Gbps respectively. In addition, with a data throughput of 324 Gbps on the backplane, it offers wirespeed performance even at high workloads. The multi-Gigabit access switch thus forms the powerful basis for modern network infrastructures in all industries and areas of application. A high-performance basis for Wi-Fi 6 PoE included Thanks to 12 high-performance 2.5 Gigabit Ethernet ports, the LANCOM GS-4530XP is the ideal LAN-side basis for integrating the new wireless LAN standard Wi-Fi 6 into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5 Gigabit Ethernet, as the required performance demands exceed those of a simple Gigabit Ethernet port. This switch in combination with the corresponding PoE power thus enables the operation of up to 12 Wi-Fi 6 access points or other network components with high performance requirements without additional electrical installation. Central power supply without additional electrical installation As a powerful PoE switch, the LANCOM GS-4530XP supplies connected PoE end devices without additional power supplies or power cabling. It supports the Power over Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with up to 30 watts at its 24 PoE ports. Thanks to high power reserves, a PoE budget of 720 watts is available, which ensures high availability of the device when using a second power supply in redundancy mode. Redundant network topologies with high-performance stacking Stacking allows up to eight physical switches to be combined into one logical unit for convenient maintenance and management at a single site or even distributed across different sites. Via the nonstop forwarding function, the stack manager cyclically supplies its standby with current information such as the MAC table and its own status information. In the event of a failure, the standby manager is able to take over without noticeable network interruption via the hitless failover function. Subsequent expansion of the network is also possible, as the new switch receives its configuration automatically from the stack manager and is ready for use within seconds. The stacking function can also be activated on both the front SFP+ FleX ports and the rear QSFP+ FleX ports, enabling a mixed stack with the LANCOM XS-5110F and XS-5116QF aggregation switches. Full control over your investment Fully equipped ex works, ready for immediate use, everything from a single source: In accordance with the principle of "Total Cost of Ownership" (TCO), the LANCOM GS-4530XP gives you planning security from the very beginning and at all times with regard to the acquisition costs for your network expansion. The full expansion with all necessary ports in the industry standard makes time-consuming and costly retrofitting of proprietary port modules a thing of the past. Furthermore, our accessories portfolio provides you with the necessary SFP modules and direct attach cables directly from us in tested LANCOM quality. In addition to the guarantee of maximum operational reliability through extensive load and long-term tests of the modules, you also avoid long delivery times. Full layer 3 routing for high network efficiency The LANCOM GS-4530XP is full layer 3 capable with policy-based dynamic routing via OSPF, providing dynamic network routes through one or more network segments. This provides tremendous increase in network efficiency for example in meshed networks with multiple aggregation switches at different locations. Hardware redundancy The LANCOM GS-4530XP with a "hot-swappable" PSU (power supply unit) allows the power supply to be replaced quickly and without interruption in the event of a defect. A separate plug-in module allows the addition of a second PSU. With the integration of two redundant power supply units, for example, highly fail-safe scenarios can be realized. In addition, the redundant (N+1) fan concept also ensures fail-safe switch operation in case one of the two fans fails. Front-to-back
Offer
All prices incl. VAT; shipping costs per shop feed. The click takes you directly to the shop's product page.
Price history (lowest price)
2026-07-12 – 2026-07-20min €5,243.31 · max €5,329.97
Product details
- Brands
- LANCOM
- GTIN
- 04044144618680