LED Labs

LED strip PRO 3Y 5050 SMD RGBNW, 16W, 300 LEDs, 5 m

Name: LED strip PRO 3Y 5050 SMD RGBNW, 16W, 300 LEDs, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. RGBNW LED Tape LED RGBNW tape is a tape that shines in colors from the RGB palette with the possibility of obtaining a neutral white color. You don't have to choose between the unique visual effect of multicolor tape and the functionality of white light. Change the decor with the touch of a button and customize the lighting to suit your needs. IP20 LED strip IP20 strips are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. 300 LED 5050 SMD tape The 5050 diode is a larger sized diode than the 3528 and 2835 LEDs that are often seen. Tape density is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. LED strips with a density of 60 LEDs per meter are strips in which it is possible to obtain uniform light. With the selection of the right profile and shade, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver RGBNW LED strips need a LED driver to work properly. It is thanks to it that it is possible to select color parameters from the RGB color palette or change to neutral white light. The controller is mounted behind the power supply, so it is important to choose the right voltage. Why choose a professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).