LED Labs

LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 3000K RA90, 5 m

Name: LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 3000K RA90, 5 m
Brand: LED Labs

The 5Y series are LED strips with a seven-year warranty. Careful selection of LEDs ensures uniform light color along the entire length of the LED strip. They feature a low color temperature spread of 3 SDCM (Standard Deviation Colour Matching). An additional advantage is the high CRI color rendering index (>90) and the 3oz PCB backing. Each LED tape has double-sided adhesive tape tesa 4965 which is the best double-sided tape on the market. Warm white color Warm white color, thanks to a pleasant light similar to that of traditional incandescent bulbs, is a solution suitable for installation in rooms intended for leisure and daily activities. Warm white light is not associated with the cold lighting characteristic of offices, making it possible to relax and unwind. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 320 LED 2835 SMD tape The 2835 diode - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Strips with a density of 64 LED/m are strips that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply Each LED strip needs a properly selected power supply for operation. When choosing a power supply, be guided by the voltage (for 24V tapes, choose a power supply with 24V output voltage), the power of the tape and the place where the power supply will ultimately be located. The power of the power supply depends on the power of the tape taking into account its length. The power of the LED strip given for one meter should be multiplied times its length. It is recommended to add 10% power supply backup. Depending on the mounting location, there are furniture, hermetic, slim power supplies.