Porsche

Outdoor Temperature Display Repair Service for PORSCHE 968

Name: Outdoor Temperature Display Repair Service for PORSCHE 968
Brand: Porsche

Outdoor Temperature Display Repair Service for PORSCHE 968 We repair your display to original specifications! Description: Most displays fail after more than 20 years of use. Used ones that still work are rare, command high prices, and can fail at any time. This offer includes the repair service for your own outdoor temperature display. Scope of Services: + Repair of the display element + Replacement of the conductive contacts + Cleaning + Functional test + Invoice with VAT shown Procedure: 1. Purchase this repair service. 2. Send your own display to our address; please include your return address! 3. Receive the fully refurbished digital display after approximately 7 business days. Address: partworks GmbH Otto-Stadler-Str. 9c D - 33100 Paderborn Installation/Removal Instructions: 1. With the passenger door open, remove the triangular, black plastic cover at the end of the dashboard. 2. Remove the screw underneath securing the long, thin switch panel. 3. Carefully pry off the knobs of the two heater/air conditioning control sliders using a small flathead screwdriver or plastic spatula. 4. Carefully pry off the heater/air conditioning control cover from the side using a plastic spatula or very small flathead screwdriver. The cover is held in place by four small clips (two at the top, two at the bottom). Be careful, the old plastic parts break easily. Remove all four screws from the control unit and pull it forward one centimeter. 5. Carefully rotate the internal sensor rosette (small, round grille) approximately 30 degrees to remove it. Loosen the screw behind it. 6. Using a small flathead screwdriver, loosen the cover to the left of the right fan grille and the screws behind it. 7. Now you can easily remove the switch panel and detach the ATA (Automatic Temperature Accumulator) with its two screws. The somewhat stiff connector is not clipped in and simply pulls off. 8. Keep the screws safe and send us only the display module. Installation is the reverse of removal. Note: Ensure that the internal sensor's hose has not slipped off and ideally use a cable tie to secure it. Duration: 15 min Tip: Avoid buying an ATA that is (still) intact but has never been fully refurbished. It's only a matter of time before it also stops working. Save yourself time, money, and hassle. International Customers, please be aware that this is a repair service; the gauge itself is not included. Brand Information: The Porsche brand is familiar to all of us. The parts we sell here are new, original parts—not used parts. Some Porsche parts are not available on the open market or are difficult to obtain. We search worldwide for precisely these spare parts for you, so that we can offer you a comprehensive portfolio and provide you with all the parts that are otherwise hard to find. We want to make things available to you so that your Porsche can continue to be cherished and maintained. Reference numbers: 944.641.223.00 9446412230001C Scope of delivery: see illustration Suitable for: Porsche 968 NOT for 968CS because the 944 digital clock is installed here