ZF - TRW

Tie Rod End Joint for PORSCHE 997 Boxster 987 + Boot

Name: Tie Rod End Joint for PORSCHE 997 Boxster 987 + Boot
Brand: ZF - TRW

Tie Rod End Joint for PORSCHE 997 Boxster 987 + Boot Many other suspension parts in stock Description: The joints on tie rods are subject to wear, which usually starts with a torn boot. Once the grease has been washed out of the tie rod end or axial joint, the ball joint will fail within a few thousand kilometers. At the latest, the defective rubber boots or ball joints will be flagged during the vehicle inspection (TÜV). Depending on the Porsche model, the tie rods can consist of two or three main components. These include the axial joint, which is the inner ball joint in front of the steering gear, and the tie rod end at the outer end of the tie rod. Sometimes the axial joint and tie rod end are connected by a separate intermediate tube. Because replacing the tie rod always requires a new wheel alignment with toe adjustment, it is recommended to replace the entire tie rod, depending on its condition. In our shop you will find a wide variety of tie rod ends, axial joints, and complete tie rods, including the correct steering boots. Our service team is happy to assist you with any questions. About the brand: The American company TRW was founded in 1901 and is now a brand of ZF Friedrichshafen AG. TRW is one of the world's leading manufacturers of disc brake systems, electrically assisted steering systems, and seat belts. TRW operates more than 20 technical centers and has 13 test tracks where the very high reliability of its brake systems is tested. Additional Information: &#9679 Length: 231.5 mm Reference Numbers: 997.347.322.01 997.347.322.00 Scope of Delivery: As shown in the illustration Suitable for: 997 Carrera/turbo/GT2/GT3 987/987c Boxster/CaymanShow more

from €37.90

1 offer

See all offers