LED Labs

Tape PRO 3Y 24V 700 LED 2835 SMD 12W UWW RA90-25m, 5 m

Name: Tape PRO 3Y 24V 700 LED 2835 SMD 12W UWW RA90-25m, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Ultra warm white color The white ultra warm color of LED lighting emphasizes the cozy character of the room. It works well in apartments, especially in living rooms, bedrooms and living rooms. It helps to relax and calm down. IP20 LED strip IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 700 LED 2835 SMD LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get.LED tapes with a density of 140 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED stripShow more