TRENDnets 10G PoE++ Injector, model TPE-319GI, combines electrical power with a 10GBASE-T network connection to produce a 10G PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+ and PoE++ devices. Connect the 10G PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) over cat6a or better cabling. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more. PoE++ The 10G PoE++ injector supplies a PoE device with PoE (15.4W), PoE+ (30W), or PoE++ (90W) power. Installation Flexibility Wall-mount design and a sturdy metal enclosure accommodates most installations scenarios. 10G Speeds Equipped with a 10GBASE-T RJ-45 port providing network speeds of up to 10Gbps over existing Cat6a or better cabling. Weight & dimensions Width: 193 mm Depth: 82 mm Height: 38 mm Weight: 672 g Power Power consumption (max): 0.7 W Total Power over Ethernet (PoE) budget: 90 W Operational conditions Operating temperature (T-T): 0 - 40 °C Operating relative humidity (H-H): 0 - 90% Network Ethernet interface type: 10 Gigabit Ethernet Cabling technology: 1000/10000 Power over Ethernet (PoE): Yes Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3an, IEEE 802.3bt, IEEE 802.3bz, IEEE 802.3u Packaging content Number of products included: 1 pc(s) Features Product colour: Black Easy to install: YesShow moreShow less
