NORLYS

NORLYS Halmstad 5022GA Hot-Dip Galvanised LED Bollard Light, 8.5 W 4000 K, 85 cm, Dimmable

Name: NORLYS Halmstad 5022GA Hot-Dip Galvanised LED Bollard Light, 8.5 W 4000 K, 85 cm, Dimmable
Brand: NORLYS

Halmstad 5022GA is an 85 cm NORLYS LED bollard with a square 12 × 12 cm post of hot-dip galvanised steel. The head is a milky PMMA diffuser ringed by horizontal steel bands and closed by a flat cap. The LED module and driver are built in, so there is no bulb to buy. Size and installation The bollard weighs 13.17 kg. The base is bolted down through three ø9 mm holes set at 120° on a 65 mm circle. Nothing for setting it into the ground is included: depending on the ground, the concrete-in anchor 205ZX0010, ground anchor 206GA0010, concrete foundation adapter 206GA0S10 or mounting adapter 3080GA0009 or 3086GA0009 is bought separately. The terminals take two conductors of up to 4 mm², and up to 2.5 mm² when looping through to the next bollard. The cable needs a round sheath of up to 12.5 mm in diameter. The fitting is protection class II, so it needs no earth conductor. How much light it gives The Philips Fortimo module draws 6.7 W and produces 1121 lm; the complete luminaire draws 8.5 W and delivers 310 lm. It is orientation light for a path, an entrance or a driveway edge, not for the whole garden. The head is only partly shielded from above: Norlys gives a ULOR of 48% and a BUG rating of B0-U3-G1, so almost half of the flux goes above the level of the fitting. 4000 K is a neutral white with no yellow tint, and CRI 80 with SDCM3 gives correct colours and the same shade across several bollards in a row. The light source has energy efficiency class D. The fitting dims on a TRIAC phase dimmer, trailing-edge or leading-edge. The module is rated for more than 50,000 h (L70) and the driver for 50,000 h; module and control gear are replaced by a professional service using repair kit ZS5022zx0013. Durability and use IP65 means dust-tight and protected against water jets, and IK10 is the highest impact-resistance grade on the IK scale. It works at −20 to +45 °C. It is intended for gardens, parks, driveways and the grounds of hotels and restaurants. The plain square form and bare galvanised finish suit a Scandinavian and modern style. To order, Norlys makes it in protection class I, in 2700 K, with a different flux, with surge protection, in a RAL colour or at another height.Mostra di più

da 604,38 €

1 offerta

↓ Attualmente il prezzo più basso degli ultimi 3 mesi

Vedi le offerte