HOMEPILOT Raumthermostat smart thermostat RF White - HOMEPILOT da 182,75 € | css.shopping
Homepilot
HOMEPILOT Raumthermostat smart thermostat RF White - HOMEPILOT
Smart thermostat for the centralised control of radiators and underfloor heating Individual room control or integration into the HOMEPILOT system The premium smart thermostat measures and regulates the room temperature for individual rooms: simply set your comfort temperature and feel good. start feeling good. In combination with the smart radiator thermostats, you can switch the heating to the same temperature everywhere in the house, with just one click. Automatic cosy warmth In the morning, the bathroom and kitchen are at just the right temperature. When you leave the house, the radiators automatically switch to energy-saving mode - in order to preheat the flat before you return home in the evening. For even greater energy efficiency: in combination with a door and window contact, the heating automatically switches off as soon as a window is opened in the room. Even more possibilities via the app You can either set the premium smart thermostat using the buttons directly on the device or control it via the HOMEPILOT app*. Using the app, you can integrate your radiators into programmed routines: for example, all heaters turn down when you leave the flat or house. You can also control the heating via the app when you are out and about - and turn it up, for example, if you come home earlier than the programmed time. * in combination with Gateway premium. The premium smart thermostat automatically measures and regulates the room temperature in different rooms, for example by controlling one or more radiators, underfloor heating, or air conditioning. You can use the premium smart thermostat as a local on-site control (stand-alone) or as a system solution. It can be used for three different types of control: room temperature controller, room temperature controller with limiting function, and cooling function. The thermostat feature an illuminated LCD display with variable intensity and is simple and intuitive to use. The set-point temperature can be adjusted on the unit at intervals of 0.5°C. In addition, up to six heating or cooling phases can be set for each day (including four set-point temperatures). In combination with our smart radiator thermostats, the room temperature measured by the thermostat can be used to control several radiator heads in a room. This ensures that the desired temperature is reached and that you do not heat more than necessary. The thermostat with dry contact output is designed as a built-in device for indoor use. The electrical connection is established using the connection terminals on the back of the installation box. For simple configuration of the thermostat, an installation wizard guides you through the settings. Thanks to its 50 x 50 mm dimensions, you can integrate the thermostat into your usual switch setup. Depending on the switch setup used, a 50 x 50 intermediate frame (according to DIN 49075) may be required. Display Display: LCD Weight & dimensions Width: 50 mm Depth: 12 mm Height: 50 mm Power Power source: AC Power consumption (standby): 0.4 W AC input voltage: 230 V AC input frequency: 50 Hz Operational conditions Temperature range (T-T): 0 - 40 °C Sensors Temperature sensor: Yes Features Smart thermostat: Yes Type: Digital thermostat Proper use: Room Interface: RF Smartphone/tablet remote support: Yes Frequency: 434.5 MHz Transmit power: 10 mW Product colour: White International Protection (IP) code: IP30 Maximum indoor range: 30 m Maximum outdoor range: 100 mMostra di piùMostra meno
