Lumines

PRO B MINI connector for single-colour 8 mm COB LED strips, single-ended with cable

Name: PRO B MINI connector for single-colour 8 mm COB LED strips, single-ended with cable
Brand: Lumines

The PRO B MINI 24-1100-87 connector links a single-colour, 8 mm COB LED strip to its supply lead. It has a transparent polycarbonate body, copper contacts and a 15 cm cable. This is the single-ended version: the strip connects at one end, while the cable runs towards a power supply or controller.Check the strip and electrical loadThe two-pin connection supports 5, 12 or 24 V DC, with a maximum current of 2 A. Before choosing it, compare the strip width, contact-pad arrangement and current drawn by the connected section. The 8 mm designation refers to the strip, not the outside width of the connector body. This version is not a connector for a multichannel RGB strip.The lead has two conductors, each with a cross-section of 0.3 mm². Compare its 15 cm length with the distance from the strip end to the intended connection point; it is a short supply lead rather than a long extension cable.Clip connection and profile clearanceThe connector closes with a clip, without soldering, and its pins pierce the strip's PCB. The body measures 18 × 10 × 5 mm. The manufacturer illustrates the PRO MINI connector inside profile D, so allow space for both the housing and the cable exit when planning the assembly.It can be used with IP20 and IP65 strips, but maintaining IP65 requires sealing the connection itself. Closing the clip does not replace that sealing step.Mostra di più

da 0,70 €

1 offerta

Vedi le offerte