NORLYS

Bollard light NORLYS Molde 1904GR Graphite RAL 7016 LED 8 W 4000 K 50 cm

Name: Bollard light NORLYS Molde 1904GR Graphite RAL 7016 LED 8 W 4000 K 50 cm
Brand: NORLYS

The Molde 1904GR is a 50 cm bollard light in cast aluminium, powder-coated graphite RAL 7016. The square-edged, 11 cm wide body turns at the top into a head bent forward, and the light leaves through a clear, structured, UV-stabilised polycarbonate diffuser that is shielded from above. Height, fixing and accessories Fifty centimetres is roughly knee height, so the fitting lights the surface of a path, border or steps rather than the space at eye level. Including the head, the bollard takes up 11 × 16.5 cm – a figure to compare with the width of the edging or planting strip where it will stand. It weighs 1.5 kg. The base is screwed down through four ø7 mm holes spaced 18 × 50 mm. The concreting anchor (1907ZX0009), the ground anchor (1908GA0009), the concrete-foundation adapter (1909GA0010) and the mounting adapters (3090GA0009, 3081XX0009, 1906ZX0009) are sold separately – for installation in a lawn or on a foundation one of them has to be bought as well. What light it gives The integrated 8 W LED module gives 4000 K light, a neutral white with no yellow tint, at CRI 80. The module produces 772 lm and 438 lm leave the fitting: the shield on top sends the light downwards, so only 2% of the flux escapes upwards (ULOR 2%). This is orientation lighting along a path, not a lamp that will light a whole section of the garden. It dims on an ordinary phase dimmer – Norlys allows both trailing-edge (TE) and leading-edge (LE) control. The light source is not changed like a bulb: the LED module is replaced by a professional service, and Norlys stocks service kit ZS1904zx0009 for this model. Durability and wiring IP54 means protection against dust and against water splashed from any direction, and IK07 describes the impact resistance of the housing. Norlys gives an operating range of −20 to +45 °C. It is a protection class I luminaire, so a protective earth conductor must be brought to the terminal. The terminals take conductors up to 3 × 2.5 mm², and further bollards can be looped on with up to 3 × 1.5 mm², so a row of fittings along a path runs off one supply line. To order, Norlys also makes this model in 2700 K, in another RAL colour and in another height.Mostra di più

da 220,04 €

1 offerta

Vedi le offerte