LED Labs

PRO 3Y 24V 300 LED 5050 SMD 12W CCT tape, 5 m

Name: PRO 3Y 24V 300 LED 5050 SMD 12W CCT tape, 5 m
Brand: LED Labs

LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each LED strip in the 3Y series comes with Blue Tape mounting tape. CCT LED Tape CCT LED tapes have the ability to change the color temperature. One LED strip provides both warm and cold colored light. LED CCT tape will find particular use where there is a need to change the climate in the room. The cold color will stimulate work, and a change to a warm color will allow the interior to have a cozy atmosphere. The CCT tape requires the installation of an LED driver. IP20 LED tape IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. LED strips 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a tape with a voltage of 24V. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. See the colors in their natural shades When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. It affects the way our eyesight perceives illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reproduces the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow natural color reproduction on the illuminated objects. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes. Increased size allows for greater light emission. Often used as functional lighting, such as. When illuminating the bathroom mirror. strips with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).