LED Labs

Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W CW RA90, 5 m

Name: Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W CW RA90, 5 m
Brand: LED Labs

LED tapes offered by our company have a wide range of possibilities for functional, yet comfortable installation of attractive interior design. Professional LED tapes are characterized by high energy efficiency, effectiveness and the ability to create a unique visual effect, which have all kinds of applications. From decorative lighting through main lighting in the living room, room, kitchen, bathroom to professional lighting in offices or markets. Cold white color The light of the cold white color tape introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 300 LED 2835 SMD tape The 2835 diode - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 300 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Requires LED driver RGB LED strips need a LED driver to work properly