LED Labs

Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90 HS, 5 m

Name: Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90 HS, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Cold white color Cold white color is a color with a blue glow. Mounted in a room, it gives a sense of sterility. Cold color of white light stimulates the body to work. It will work well where focus is needed. IP65HS LED strip LED strips IP65 Heat Shrink is a product with increased resistance to moisture and splashing. Thanks to the use of a special shrinking band, which differs in its characteristics from the traditional silicone coating found in waterproof tapes makes it a modern solution for better color uniformity than is the case with LED tapes with the classic IP65. Such a solution allows to maintain high lighting performance wherever we need increased resistance to moisture and splashing. See the colors in their natural shades CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 600 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Tapes with a density of 120 LED/m allow you to achieve a line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. Requires installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Requires LED driver RGB LED strips need a LED driver to work properly