V-TAC

Designer LED pendant lamp 38W 3000K 4560lm black VT-7820 V-TAC

Name: Designer LED pendant lamp 38W 3000K 4560lm black VT-7820 V-TAC
Brand: V-TAC

VT-7820 is a designer pendant from V-TAC built around five black rings — three large and two smaller — staggered along a single bar spanning 97.4 cm. Every ring throws its light straight down through a matt diffuser, so at eye level you see only the black hoops while the light lands on the table rather than in your eyes. The bar hangs on thin steel cables below a rectangular canopy. 4560 lumens of warm 3000 K light The built-in SMD LED modules draw 38 W and return 4560 lm, which works out at 120 lm/W — an efficiency closer to an office luminaire than to a typical decorative pendant. That is enough output for VT-7820 to be the main light over a kitchen island or a dining table up to two metres long. The 3000 K colour is fixed: the EPREL registry (entry 1599563) records a single colour temperature for this model, with no tuning. Colour rendering is above 80, while R9 — the deep-red component — sits at 13, so the lamp lights a room well but is not the fixture for colour-critical work or product display. What to know before you buy The luminaire is not dimmable; EPREL declares it as non-dimming, so it should not be wired to a wall dimmer. Colour consistency is SDCM 6, which matters if you plan to hang two units side by side — their whites can differ slightly. The LEDs are permanently integrated and cannot be replaced: the declared life is 20,000 hours, roughly 18 years at three hours a day, with more than 15,000 on/off cycles. Start-up is instant, reaching full brightness in 0.001 s. Installation and operating conditions VT-7820 wires straight into a 220–240 V supply through the terminal block in the canopy — there is no lampholder and no bulb, so no driver or transformer is needed. The IP20 rating puts it in dry indoor rooms; the manufacturer quotes an operating range of −20 °C to +45 °C. The fixture weighs 2.6 kg, which is worth allowing for when choosing fixings in a plasterboard ceiling. Specification Manufacturer code: VT-7820, order code 10044 Power 38 W, luminous flux 4560 lm, efficacy 120 lm/W Colour temperature 3000 K (warm white), fixed CRI >80, R9 = 13, SDCM 6 Beam angle 120° Dimmable: no Energy class E (A–G scale), 38 kWh/1000 h Flicker Pst LM 1.0, stroboscopic effect SVM 0.9 Life 20,000 h, >15,000 switching cycles Supply AC 220–240 V, 50/60 Hz, 0 W standby Dimensions 974 × 260 × 1100 mm, weight 2.6 kg IP20, operating temperature −20 °C to +45 °C Certification CE, EMC, RoHS; EPREL 1599563 Warranty 2 yearsShow more

from 77,68 €

1 offer

See all offers