Bürkle

Bürkle Depth stop for samplers, 25 mm ID, 1.4404 V4A

Name: Bürkle Depth stop for samplers, 25 mm ID, 1.4404 V4A
Brand: Bürkle

For a sampling procedure to be reproducible, it must always be carried out under the same conditions. The depth stop for samplers is a useful accessory for this purpose. The depth stop is attached to the sampler at any height using a C-clamp screw. This ensures that the sampler penetrates to the same desired depth each time it is inserted. The penetration depth is thus fixed and can be precisely recorded in a test report or sampling instructions, for example. The depth stop can also prevent unintentional piercing during sampling. Enables standardized and therefore reproducible sampling Very good clamping effect due to C-clamping screw Available for 25/50 mm Ø, suitable for many sampler lances The depth stop for samplers helps in all areas in which the sampling parameters must be precisely specified and defined, e.g. for outgoing and incoming goods inspections of bulk materials that can segregate.Meer tonen

vanaf € 170,10

1 aanbieding

Bekijk aanbiedingen